Rexroth MG10G1X/V THROTTLE VALVE

d:49.21 mm; B:49.2 mm; Designation of housing:SP208-210/90-; T max.:100 °C; C0:23.2 kN; A:31 mm; H2:61 mm; Designation of bearing:EX210-31G2T04; Weight:4.14 kg; G:R1/8";

D:140 mm; Bearing number:7216 ADB; a:89,5 mm; Size (mm):80x140x52; Outer Diameter (mm):140; Bore Diameter (mm):80; d:80 mm; Angle (α):25 °; B1:52 mm; Width (mm):52;

Fw:28 mm; D:38 mm; Bore Diameter (mm):28; Bearing number:BK283820; Brand:ISO; Width (mm):20; C:20 mm; Size (mm):28x38x20; Outer Diameter (mm):38;

Bearing - Housing - Seal:LSM200BRH; Note:This product line wa; Dimension H1:1.5 in; Bolt Size:4 x M24; Series Type:Light Series; Dimension M:8.0 in; Shaft Size:200 mm; Cr - Dynamic Load Rating:138033 lbf; Dimension J:16.6 in; Dimension H:9.764 in;

Number of balls z:29; Preload class D - GD:4480 N; Calculation factor - f1:0.98; Mass bearing:1.65 kg; Preload class B GB:1120 N; Reference grease quantity Gref:21.6 cm³; Calculation factor (back-to-back, face-to-face) Y1:0.92; Preload class B:457 N/micron; Calculation factor - Y2:1.41; d2:155.

Bearing Type:Split Cylindrical Re; Bearing - Housing - Seal:LSE615BRHRSS; Bearing - Housing - Seal UPC:013992103680; Note:This product line wa; Dimension T:20.0 in; Ca - Axial Load Rating:8183 lbf; Seal Type:Viton Single Lip; Dimension P:1.1 in; Shaft Size:6-15/16 in; Dimension N:14.375 in;

G:R1/8"; T max.:100 °C; d:45 mm; Designation of open end cover:SCO209-45; C:31.85 kN; A:31 mm; T min.:-20 °C; Designation of housing:SP208-210/85N-; B:49.2 mm; Designation of bearing:UC209G2L3;

Brand:ISO; B1:144 mm; Outer Diameter (mm):360; a:225 mm; Width (mm):144; Size (mm):170x360x144; Angle (α):25 °; d:170 mm; Bearing number:7334 ADB; D:360 mm;

Thread (G):M6x1; d:15 mm; Designation of bearing:UC202G2; Bore Diameter (mm):15; B1:31 mm; Weight:0,5 Kg; Bearing number:UCC202; G:M6x1; Brand:SNR; s1:15.5 mm;

Bore Diameter (mm):320; Outer Diameter (mm):400; d:320 mm; D:400 mm; Width (mm):38; B:38 mm; Size (mm):320x400x38; C:38 mm; Brand:ISO; Bearing number:NCF1864 V;

Y - ISO Factor9:1.5; C90 - Dynamic Radial Rating (90 million revolutions)4:55600 lbf; db - Cone Backface Backing Diameter:203.96 mm; Da - Cup Frontface Backing Diameter:298.50 mm; Cg - Geometry Factor:0.136; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:38100 lbf; D:319.964 mm; Cage Type:St

S:17.5 mm; G:R1/8"; T min.:-20 °C; Designation of housing:FE207N-; d:31.75 mm; Designation of bearing:UC207-20G2; Recommended tightening torque for set screw:8 Nm; s1:21.45 mm; Dz:80 mm; Designation of open end cover:SCOU207-20;

C:12 mm; Brand:ISO; Fw:22 mm; Bore Diameter (mm):22; Outer Diameter (mm):28; Bearing number:HK2212; Width (mm):12; D:28 mm; Size (mm):22x28x12;

Outer Diameter (mm):72; d:35 mm; Reference speed:7 600 r/min; B:17 mm; Bearing number:6207LLH; Size (mm):35x72x17; Weight:0,288 Kg; D:72 mm; C:17 mm; r min.:1,1 mm;

Inch - Metric:Inch; Actual Bolt Center to Center:0 Inch | 0Millimeter; Noun:Bearing; Rolling Element:Ball Bearing; H1:13,996 mm; S1:15,901 mm; Weight / Kilogram:0.55; Bore:0.625 Inch | 15.875; Thread (Q) - 1/4-28 UNF:1/428 UNF;